Tolerance factor and phase stability of the garnet structure. Corrigendum

An error in an equation in the paper by Song et al. [ Acta Cryst. (2019), C 75 , 1353–1358 ] is corrected.     

Novel halogenated cyclopentasilylene-2,4-dienes via DFT

In view of immense importance of silylenes and the fact that their properties undergo significant changes on substitution with halogens, here, we have used B3LYP/6-311++G** level of theory to access the effects of 1–4 halogens (X = F, Cl, Br, and I) on four unprecedented sets of cyclopentasilylene-2,4-dienes; with the following formulas: SiC₄H₃X ( 1 _X ), SiC₄H₂X₂ ( 2 _X ), SiC₄HX₃ ( 3 _X ), and SiC₄X₄ ( 4 _X ). In going down from F to I, the singlet (s)-triplet (t) energy gap (ΔE_s-t, a possible indication of stability), and band gap (ΔE_H-L) decrease while nucleophilicity (N), chemical potential (μ), and proton affinity (PA) increase. The overall order of N, μ, and PA for each X is 2 _X > 1 _X > 3 _X > 4 _X . Precedence of 2 _X over 1 _X is attributed to the symmetric cross conjugation in the former. The highest and lowest N are shown by 2 _I and 4 _F . The trend of divalent angle () for each X is 4 _X > 1 _X > 3 _X > 2 _X . The results show that in going from electron withdrawing groups (EWGs) to electron donating groups (EDGs), the ΔE_s-t and ΔE_H-L decrease while N, μ, and PA increase. Also, rather high N of our scrutinized silylenes may suggest new promising ligands in organometallic chemistry.     

The structural,electronic and magnetic properties of Ag4M and Ag4MCO (M = Sc–Zn) clusters

The structures, spectra and electronic and magnetic properties of Ag₄M and Ag₄MCO (M?=?Sc–Zn) clusters have been studied using density functional theory and CALYPSO structure searching method. Structural searches show that M atoms except Zn tend to occupy the highest coordination position in the ground state Ag₄M and Ag₄MCO clusters. Carbon monoxide is most easily adsorbed on Ag atom of Ag₄Zn and M atom of other Ag₄M. Infrared and Raman spectra, photoabsorption spectra and photoelectron spectra of Ag₄M and Ag₄MCO clusters are forecasted and can be used to identify these clusters from experiment. Analysis of electronic properties indicates that the adsorption of CO on Ag₄M clusters changes the zero vibrational energy (ZPVE) and increases stability of the host clusters. Dopant atoms except for Zn improve the stability of silver cluster. The Ag₄Ni cluster shows high chemical activity and maximum adsorption energy for carbon monoxide. Magnetism calculations reveal that the magnetic moment of Ag₄M (M?=?Mn–Ni) cluster adsorbed by carbon monoxide is decreased by 2 μ_B. The change of magnetic moment makes it possible to be used as a nanomaterial for carbon monoxide detection. Simultaneously, it is found that the adsorption of CO on Ag₄Cu cluster is a physical adsorption.     

光寻址电位传感器的正交相位检波检测方法

光寻址电位传感器的幅度检测方法易受噪声干扰,灵敏度差,信噪比和精度低,且受调制光源的影响较大,影响检测结果的准确性.为此提出了一种基于正交相位检波的光寻址电位传感器检测方法.该方法是将光寻址电位传感器的输出光电流信号分别与两路正交信号相乘,通过低通滤波提取直流分量并相除,即可得到光寻址电位传感器的输出信号相位信息.与已有的光寻址电位传感器相位检测方法相比,该方法具有算法复杂度低、实时性高的优点.实验研究了调制光源光强对光寻址电位传感器幅度检测和相位检测的影响,对比分析了光寻址电位传感器的传统幅度检测方法与正交相位检波检测方法对pH检测的灵敏度、线性度及信噪比.结果表明,相比于幅度检测方法,调制光源光强对光寻址电位传感器的相位检测影响更小,在频率为10 kHz,pH的范围为1.68~10.01的情况下,相位检测方法比幅度检测方法测得的灵敏度增加了7 mV/pH,精度提高了14.9 mpH,非线性误差减小了0.003%,均方差减少了0.1051×10^-5,信噪比增加了8.2827 dB.该方法特别适用于弱光下的光寻址电位传感器检测.     

Enhanced magnetocaloric effect in Eu-doped La0.7Ca0.3MnO3 compounds

Orthorhombic La_0.7-xEu_xCa_0.3MnO₃ samples (x = 0.04–0.12) with apparent density of ρ = 3.9–4.1 g/cm³ prepared by solid-state reactions have been studied. The analysis of temperature-dependent magnetization for an applied field H = 500 Oe indicated a decrease of the Curie temperature (T_C) from about 225 K for x = 0.04 through 189 K for x = 0.08–146 K for x = 0.12. The magnetocaloric (MC) study upon analyzing M(H, T) data has revealed that the magnetic entropy change around T_C reaches the maximum (|ΔS_max|), which is dependent on both x and H. For an applied field interval of ΔH = 60 kOe, |ΔS_max| values are about 5.88, 4.93, and 4.71 J/kg⋅K for x = 0.04, 0.08, and 0.12, respectively. Though |ΔS_max| decreases with increasing x, relative cooling power (RCP) increases remarkably from 383 J/kg for x = 0.04 to about 428 J/kg for x = 0.08 and 0.12. This is related to the widening of the ferromagnetic-paramagnetic transition region when x increases. Particularly, if combining two compounds with x = 0.04 and 0.08 (or 0.12) as refrigerant blocks for MC applications, a cooling device can work in a large temperature range of 145–270 K, corresponding to RCP ≈ 640 J/kg for H = 60 kOe. M(H) analyses around T_C have proved x = 0.04 exhibiting the mixture of first- and second-order phase transitions while x = 0.08 and 0.12 exhibit a second-order nature. The obtained results show potential applications of Eu-doped La_0.7Ca_0.3MnO₃ materials for magnetic refrigeration below room temperature.     

Measured and Predicted Solubility Phase Diagrams of Quaternary Systems LiBr-NaBr-MgBr2-H2O and LiBr-KBr-MgBr2-H2O at 298.15 K

The stable phase equilibria of quaternary systems LiBr-NaBr-MgBr₂-H₂O and LiBr-KBr-MgBr₂-H₂O at 298.15 K were studied by both experimental measurement(isothermal solution saturation method) and theoretical prediction(Pitzer model). The solubilities of the saturated solution have been determined experimentally and two stable phase diagrams and relevant water diagrams of the two quaternary systems were obtained. Results show that quaternary system LiBr-NaBr-MgBr₂-H₂O is hydrate II type as NaBr and NaBr·2H₂O coexistence. Its phase diagram consists of only one invariant point, four univariant curves, and five crystallization fields. The quaternary system LiBr-KBr-MgBr₂-H₂O is a complex type as the double salt KBr·MgBr₂·6H₂O formed. In addition to this double salt, the three single salts LiBr·2H₂O, KBr and MgBr₂·6H₂O also crystallize. In this paper, the solubilities of phase equilibria in above quaternary systems were also calculated by the Pitzer's electrolyte solution model. All the needed parameters can be obtained from the literature or be fitted by experimental data. On the Basis of the experimental and calculated results, the phase diagram of the quaternary system was plotted for comparison. It shows that the calculation results are consistent with the experimental ones.     

Global stability of a multistrain SIS model with superinfection and patch structure

We study the global stability of a multistrain SIS model with superinfection and patch structure. We establish an iterative procedure to obtain a sequence of threshold parameters. By a repeated application of a result by Takeuchi et al. [Nonlinear Anal Real World Appl. 2006;7:235–247], we show that these parameters completely determine the global dynamics of the system: for any number of patches and strains with different infectivities, any subset of the strains can stably coexist depending on the particular choice of the parameters.     

A self-penetrating and chemically stable zinc (ii)-organic framework as multi-responsive chemo-sensor to detect pesticide and antibiotics in water

Guided by the self-penetrating features can improve the stability of metal organic frameworks (MOFs), an unprecedented 3D self-penetrated framework, {[Zn (tptc)_0.5(bimb)]·H₂O}_n ( NUC-6 , here NUC corresponding to North University of China), with 3D (4,4)-c {8⁶} net, was designed. Benefit from the high chemical stability and excellent luminescent property, NUC-6 can be act as an efficient multi-response chemo-sensor in detecting dichloronitroaniline pesticide and nitrofuran antibiotics in water with the detection limits are 116 ppb for DCN pesticide, 16 ppb for NFT antibiotic, and 12 ppb for NTZ antibiotic. Besides, the mechanisms of luminescence quenching were revealed from the viewpoint of internal filter effect (IFE) and photo-induced electron transfer (PET), implied by the optical spectroscopy and quantum chemical calculation. This work provides a promising strategy to design stable MOFs by improving the self-penetrating features and to expand their practical applications in the detection of organic pollutants in aqueous medium.     

The existence and stability of bulk nanobubbles:a long-standing dispute on the experimentally observed mesoscopic inhomogeneities in aqueous solutions

In theory,nanobubbles can stably exist with a lifetime of microseconds at most,but numerous experimental observations demonstrate that nanobubbles in bulk solution can be stable from hours to weeks.Although various conjectures on the stability mechanism of bulk nanobubbles,such as the contaminant mechanism,skin mechanism,surface zeta potential mechanism,are proposed,there has not yet been a unified conclusion.Since bulk nanobubbles show great potential in a wide spectrum of applications and are relevant to a number of unsolved questions on cavitation and nucleation,the debate over their stability mechanisms has been active.In the past,extensive studies have been carried out to understand the mechanism of nanobubble stability,and important insights have already been provided.This paper will provide a brief overview of our current understanding of the unexpected stability of bulk nanobubbles.